Here you will learn the basic troubleshooting methods of your computer.
1. Trial and error: When you find a faulty component in your computer, first of you check it with the other computers so that you can make sure whether the fault is in the component or not.
2. Check cables: In case of any device failure, check all the cables of your computer such as data cables, power cable, internal circuitry cables etc and make sure that all the cables are plugged in and working fine.
3. Hardware settings: Check the hardware settings in the CMOS and in the device manager of the system and make all the device drivers and up to date and all the cards are plugged in properly.
3. Hardware settings: Check the hardware settings in the CMOS and in the device manager of the system and make all the device drivers and up to date and all the cards are plugged in properly.
4. Notice changes: When you notice a software or hardware error in your computer, determine what was changed before the problem occurred.
5. Event viewer: Use the event viewer utility by going to Start > Control panel > Administrative tools > Event viewer. In the event viewer you will find the error or warning messages associated with any faulty hardware or software.
6. Make notes: Troubleshooting is big learning option and we can learn a lot when we face any kind of troubleshooting in our computer. Make notes including the error messages and their solutions, so that you have a record that how a certain problem occurred and how did you solve it.