Introduction
Would you like to have an easy method to tweak your Systems Services with little or no risk? That is what this page is here for. You can create multiple hardware profiles for the purpose of testing different services configurations. Ensure you read all instructions provided and the Pro's and Con's at the bottom of this page.
This page is here to assist those people that are worried about breaking their computer. As such, hardware profiles are not "really" required for the "safe" configuration or "Internet Gateway" as it is very easy to place the changed services back to the default value. This information assists people with testing out "Gaming" and "Bare-bones " configurations with the knowledge that "default is a reboot away." Having that security is a good thing.
Items to think about
- Ensure that, if you own a USB keyboard, it will work with hardware profiles by creating one and rebooting to see if you can navigate the options menu.
- Adjusting a service directly (in the General Tab) effects all hardware profiles and users.
- Adjusting a service using hardware profiles effects all user accounts.
- Ensure that you look at the "Started" column to see which services are running in any particular profile.
- With hardware profiles, there is no "Manual" option located in the "Log On Tab." Services that are set to "Manual" globally (General Tab) will remain that way unless changed globally or in the hardware profiles to "disable."
- If the service is set to Automatic or Manual by default or recommended to place it into Automatic or Manual, leave it at "Enabled" in the hardware profiles "Log On Tab."
- If you desire a service to be set to Automatic, from Manual or Disabled, place it that way globally (in the general tab) and then enable it via the profiles on test tweaking setups.
- Something I have not tried is if, in a particular hardware profile, the System Restore Service is "Disabled," whether or not it deletes previous restore points or just does not create more for that profile.
- Two services you cannot disable with this method are Event Log and Plug and Play.
- The service that you CAN disable and will cause your system to become unbootable is Remote Procedure Call. Do not disable RPC via the hardware profiles method or any other method.
Pro's
- The ability to tweak your system with little or no risk.
- Multiple configurations for different tasks or users.
Con's
- Tweaking your computer's performance may become addictive. :)
1) Shall we begin? (Image 1.1)Head to: Start --> Control Panel. |
2) Control Panel: (Image 1.2) |
3) Performance and Maintenance Panel: (Image 1.3) |
4) System Properties: (Image 1.4) |
5) Hardware Profiles Dialog: (Image 1.5) |
6) Name Your Profile: (Image 1.6) |
7) Copy and Rename Your Profiles: (Image 1.7) |
8) Example Naming Scheme: (Image 1.8)Your Hardware Profiles could look something like this:When finished, select OK on the Hardware Profiles Dialog and System Properties. |
9) Administrative Tools: (Image 1.9) |
10) Services Panel: (Image 1.10) |
11) Services Properties Dialog: (Image 1.11) |
12) Using the Log On Tab: (Image 1.12) |
13) Reboot: (Image 1.13) |
14) Example Boot Menu: (Image 1.14) |